Digital Fluid Temperature Sensor

DESCRIPTION:

SM-FluidTemp accurately measures the the temperature of any liquid. This is ideal for coolant temp, transmission temp, oil temp and any other fluid temp monitoring. Up to 32 SM-FluidTemp modules can be daisy chained together in the iMFD system. SM-FluidTemp can also be used as a stand alone unit capable of interfacing with 3rd party hardware. All Sensor Modules are housed in high quality extruded aluminum designed to operate even in the most extreme conditions. In addition, all SM modules offer outstanding digital accuracy, response and resolution which far exceeds that of a standard gauge.

CONNECTION DIAGRAM:

 

 

1. Connects to 12V-18V power source.
2. Analog outputs (0-5V analog output, ground)
3. Termination jumper. Closed for first SM in daisy chain.
4. Connects to next SM in daisy chain or to first DM
5. Connects to previous SM or unconnected if first SM in daisy chain
6. Connects to resistive type fluid temperature sensors

USES:

ANALOG OUTPUTS:

1.0-5V analog linear output

INCLUDED ITEMS:

1.SM-FluidTemp main unit
2.4ft power wire with 2.1mm connector
3.4ft Analog wires and connector with 4 terminals
4.1ft Serial Cable
5.Termination jumper
6.Quick start guide
7.One Resistive Type Fluid Temp Sender (Additional sensor sold separately)

SPECIFICATIONS:
Physical Dimensions 2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H
Accuracy ~0.5 Deg C (~1 Deg F)
Measurement Range 0-150 Deg C (32-302 Deg F)
Analog Outputs Linear 0-5V (Driving Current 20mA)
Operating Voltage 8V-18V
Power Consumption 0.3 Watts
Operating Temperature 0 - 85 Deg C
Sensors Two Resistive Type Temperature Sender
Enclosure Extruded Aluminum